For Safe Operation - JUKI DSC-246 Instruction Manual

Hide thumbs Also See for DSC-246:
Table of Contents

Advertisement

1. To avoid personal injury, never put your fi ngers under the needle when you turn ON
the power switch or operate the sewing machine.
2. To avoid personal injury, never put your fi ngers into the thread take-up cover while
the sewing machine is in operation.
3. Turn OFF the power switch when tilting the machine head, or removing the belt
cover or the V belts.
4. To prevent possible personal injury caused by being caught in the machine, keep
your fi ngers, head and clothes away from the handwheel and the thread take-up
while the sewing machine is in operation. In addition, place nothing around it.
5. To avoid personal injury, never operate the sewing machine with the fi nger guard
removed.
6. To avoid personal injury, be careful not to allow your fi ngers in the machine when
tilting the machine head.
1. For the safety, never operate the sewing machine with the ground wire for the
power supply removed.
2. Be sure to turn OFF the power switch in prior when connecting/disconnecting the
power plug.
3. When thunders occurs, stop the work for the safety and disconnect the power plug.
4. When the sewing machine is suddenly moved from a cold place to a warm place,
there is a case where dew condensation may occur. Turn ON the power after there
is no worry of the drop of water.
5. To prevent fi res, periodically draw out the power plug from the plug socket and
clean the root of the pins and the space between pins.
6. The hook rotates at a high speed while the machine is in operation.
To prevent possible injury to hands, be sure to keep your hands away from the
vicinity of the hook during operation. In addition, be sure to turn OFF the power to
the machine when replacing the bobbin.
7. To avoid possible accidents due to abrupt start of the machine, be sure to turn OFF
the power to the machine.
8. Be careful of handling this product so as not to pour water or oil, shock by dropping,
and the like since this product is a precision instrument.
9. When tilting or returning the sewing machine to the home position, hold the upper
side of the machine head with both hands and perform the work quietly so that
fi ngers or the like are not caught in the machine.
CAUTION :
Note that safety devices such as "eye guard", "fi nger guard", etc. may be omitted from the
illustrations in this Instruction Manual for easy explanation.
When operating the machine, be sure not to remove these safety devices.

FOR SAFE OPERATION

v

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dsc-246v-7Dsc-246-1Dsc-246v

Table of Contents