Rack Mounting Instructions - Supermicro 2027R-E1R24L User Manual

S S S
UPER TORAGE
2-4

Rack Mounting Instructions

This section provides information on installing the chassis into a rack unit with the
rails provided. There are a variety of rack units on the market, which may mean
that the assembly procedure will differ slightly from the instructions provided. You
should also refer to the installation instructions that came with the rack unit you are
using. This rail will fi t a rack between 26.5" and 36.4" deep.
Note: fi gures are for illustrative purposes only. Servers should always be installed
in racks from the bottom up.
Identifying the Sections of the Rack Rails
The chassis package includes two rail assemblies in the rack mounting kit. Each
assembly consists of three sections: An inner chassis rail which secures directly to
the chassis, an outer rail that secures to the rack, and a middle rail which extends
from the outer rail. These assemblies are specifi cally designed for the left and right
side of the chassis.
Rail Assembly
(Shown with Rails
Retracted)
This Side Faces
Outward
Figure 2-1. Identifying the Outer Rail, Middle Rail and Inner Rails
YSTEM 2027R-E1R24L User's Manual
(Left Rail Assembly Shown)
Outer Rail
Middle Rail
Locking Tab
2-4
Inner Rail