Removing The Chassis Cover - Supermicro 2027R-E1R24L User Manual

6-3

Removing the Chassis Cover

1
1
Release Tab
Removing the Chassis Cover
You may need to gain access to the inside of the server to perform various main-
tenance tasks.
1. Press the release tabs to remove the cover from the locked position. Press
both tabs at the same time.
2. Once the top cover is released from the locked position, slide the cover
toward the rear of the chassis.
3. Lift the cover off the chassis.
Warning: Except for short periods of time, do NOT operate the server without the
cover in place. The chassis cover must be in place to allow proper airfl ow and
prevent overheating.
Figure 6-2. Removing the Chassis Cover
Chapter 6: Advanced Chassis Setup
1
3
1
2
1
1
6-3
Remove this screw
(if necessary)