Table of Contents
Advertisement
Quick Links
Helston 2 door Wide Wardrobe
Stock number: 80311205 · 80311311· 80317207
Thank you for purchasing Helston 2 door wide wardrobe. Please read the instructions carefully
before use to ensure safe and satisfactory operation of this product.
Pre-assembly preparation
Please ensure instructions are read in full before attempting to assemble this product
Necessary Tools
DO NOT USE POWER TOOLS !
Advertisement
Table of Contents
Related Manuals for John Lewis 80311205
Summary of Contents for John Lewis 80311205
- Page 1 Helston 2 door Wide Wardrobe Stock number: 80311205 · 80311311· 80317207 Thank you for purchasing Helston 2 door wide wardrobe. Please read the instructions carefully before use to ensure safe and satisfactory operation of this product. Pre-assembly preparation Please ensure instructions are read in full before attempting to assemble this product...
- Page 2 Please check the pack contents before attempting to assemble this product. A full checklist of components is given in this leaflet. If any components are missing, please contact the number on the front of this assembly instruction. HEAVY, This product is it should be assembled as near as possible to the point of use.
- Page 4 Step by step assembly instructions Step One (01) & (08), (02) & (03) Lay parts and add cams (A). PLEASE PLACE THE PARTS ON A SMOOTH SURFACE, in order not to scratch the paint. Fittings ( F ) must be screwed in to the shelf (04) holes predrilled by using screwdriver and 4x screws ( C ).
- Page 5 Step Two Two persons required. Lay part (09) on the ground. PLEASE PLACE THE PARTS ON A SMOOTH SURFACE, in order not to scratch the paint. Please take the doors from the box as per picture below according to the arrows direction shown. All fittings (A) must be screwed into the pre fitted cams on the front panel (11).
- Page 6 Step Four Two persons required. Please position the assembled wardrobe components vertically on the base of the wardrobe as shown in the picture. Please angle the front frame as per diagram and locate the dowels into the bottom holes. Front (09) must attach to wardrobe frame according to the arrows direction shown.
- Page 7 Step Six Please insert 1x sham key handle (E) into the front door and secure screw from inside the door. Attach the back panel to the wardrobe, use 32x screws (G) to tighten the panel to the wardrobe. Hanging rail (05) must be placed to pre screwed (Step One) 2x fittings (B) on side panels. Please tighten fitting (D) using 2x screws (C) to the holes prepared.
-
Page 8: Care And Maintenance
It is recommended that before moving heavy objects to a new location they are completely disassembled to avoid personal injury or damage to the furniture. Please be careful to retain all fittings when doing this. PLEASE KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE John Lewis Partnership 171 Victoria Street London SW1E 5NN www.johnlewis.com...