Viessmann Vitodens 200 WB2 11-44 Installation Instructions Manual page 38

Control Connections
Electrical Connections
Routing of connecting cables (continued)
7.
5.
8.
38
(continued)
6.
10.
5. Loosen and remove junction box
cover.
6. Break off required number of tabs
for external cables to be connected
(see page 35).
7. Insert necessary bushings.
8. Slide in bottom portion of the strain
relief clamps at the corresponding
bushings (create openings by using
a screwdriver).
9. Run cables through corresponding
bushings into the control case or
junction box.
10. Attach top portion of strain relief
clamps.
9.
Installation Instructions
Power/Pump Module