GPS Enable/Disable(
1. From the main menu, press
The current selection (On/Off) is highlighted. The display
shows:
On — Location Service On
Off — Location Service Off
2. Scroll to your selection and press Set.
If GPS is enabled but the radio is not
synchronized to the GPS satellites the
following idle screen is displayed:
Entering GPS Location Service
To enter the GPS sub-menu, press
-
9 Location
Menu
Position — provides the actual position
information.
Interface — allows you to enable/disable the GPS location
service.
This estimate of accuracy of the calculated location is only a
very rough estimate and may vary substantially from the
actual accuracy of the approximate location information
reported.
• The variation will vary in accordance to the GPS
Configuration set by your Service Provider.
• The availability of the GPS Location menus is dependent on
your terminal configuration, please contact your Service
Provider for further details.
Viewing Your Position (
1. From the main menu, press
Position.
2. This displays the following information about the last time
your location was calculated (if available):
9 2)
Menu
Menu
.
9 1)
Menu
Menu
-
9 Location
2 Interface
Range 1
No GPS signal
Status
(
9)
Menu
1 Position
1 Position
2 Interface
Back
- 9 Location - 1
.
Optns
Ok
71