Motorola MTM800 Feature User Manual page 101

After completing the settings, the display returns either to the
Scan sub-menu or to Group mode.
To view the active scan list and its talkgroup status, see
section below.
Viewing the Active Scan List (
To enter the sub-menu,
press
Menu
This sub-menu allows you to view the
active scan list.
The display will show one of the following statuses:
• There is a selected, inactive scan list. Scanning is off.
• There is no selected scan list. Scanning is off.
• There is a selected, active scan list. Scanning is on.
To see the talkgroup status (active or not active) and priority
(if pre-programmed), press View, and scroll through the
talkgroups.
Editing Scan Lists (
To enter the sub-menu, press
The display allows you to scroll through
the scan lists to see the number of
talkgroups used per list.
To edit/view the contents of a scan list,
press Optns and scroll to your selection.
Press Ok to select one of the following
options:
1. Add a talkgroup to the selected scan list.
Every added talkgroup (including a
favourite group) comes with its range, its name or number,
and its priority (if pre-programmed).
• To select a range, scroll through the range list. The list
does not show ranges whose talkgroups are fully used
in the selected scan list. Press Ok to select a range.
Menu
7 Scan - 2 Active List.
7 3)
Menu
7 2)
Scan List:
Scan List 1
Back
7 Scan - 3 Scan Lists.
Menu
Scan List 1
Used: 4
Free: 36
Back
5 Clear List
1 Add Group
2 View List
Back
View
Optns
Ok
95