Access Control List - Alfa Network AWUS036ACM User Manual

3.3 Access Control List

Click the Access Control List icon of the utility and the Access Control List screen will appear
as Figure 3-9. In this page, you can enable/disable the AP to connect with the specified Mac
address. Click Allow All, and enter the Mac address allowed to connect to your AP in the empty
field beside MAC Address, then click
existing Mac address in the list and click
When clicking , you will clear all the Mac addresses in the Access Control List as Figure 3-12.

Access Policy - This field allows you to start the function or not. System default is disabled.
• Disable - Disable the Access Policy feature.
• Allow All - Allow all the MAC addresses in the Access List to access the AP.
• Reject All - Disable all the MAC addresses in the Access List to access the AP.

Mac Address - Manually force the Mac address using the function.

Apply - Click to make the settings take effect.
to add it to the list, shown in Figure 3-10. Highlight an
to remove it from the list as shown in Figure 3-11.
Figure 3-9 Access Control Function
2 8
ALFA WiFi USB Adapter User Guide