Aquamaster Explorer Connections – Use Of Tamper-Detection Seals - ABB AquaMaster Explorer Instruction Manual

Electromagnetic Flowmeter
AquaMaster™ Explorer
3.2.3 AquaMaster Explorer Connections – Use of Tamper-Detection Seals
Referring to Fig. 3.7:
1. Slide the optional locking-ring
2. Connect the cable
3. Slide the locking-ring
4. Pass the wire of the seal
front of the transmitter. Close the seal.
A
Fig. 3.7 AquaMaster Explorer – Use of Tamper-Detection Seals
Note. This arrangement is an option and applies to Bulgin connectors only.
IM/AM/E Issue 10
A
(from pack WEBC 2004) over the cable to be sealed.
B
to the appropriate transmitter connector.
C
over the connector.
D
through both the hole in the locking-ring and the matching hole in the
C
B
3 Electrical Installation
D
17