Event Controls - Imperx C5180M User Manual

Cheetah Python Camera with USB3 Interface – User Manual
SI_Info: Reports information about stream interface.
SI_Control: Controls streaming operations.
SI_Required_Payload_Size: Reports minimum required payload size.
SI_Required_Leader_Size: Reports minimum required size in bytes needed for the leader
transfer.
SI_Required_Trailer_Size: Reports minimum required size in bytes needed for the trailer
transfer.
SI_Maximum_Leader_size: Defines the maximum size of the leader the device may use.
SI_Payload_Transfer_Size: Expected size of a single payload transfer.
SI_Payload_Transfer_Count: Contains the number of regular payload data bulk transfers.
SI_Payload_FinalTranser1_Size: Contains the size of the Final Transfer 1 payload bulk
transfer.
SI_Payload_FinalTranser2_Size: Contains the size of the Final Transfer 2 payload bulk
transfer.
SI_Maximum_Trailer_Size: Defines the maximum size of the trailer the device may use.

4.7.12 Event Controls

Event parameters notify the host computer software about certain events occurring on
the camera side, for example, a trigger event or an output that turns on a strobe light.
EventTest: Returns the unique ID of the test event.
EventTestTimestamp: Returns the timestamp of the Test event.
TriggerEventTest: Generates the Test event if the event channel is enabled.
GP_INPUT_EventEnable: Enables General Purpose IN1/IN2 events.
GP_OUTPUT_EventEnable: Enables General Purpose OUT1/OUT2 events.
Image_ACO_EventEnable: Enables Image Acquisition events.
December 5, 2017
Figure 28: Event Controls.
Page
56 of 78
Rev 1.0