Cheetah Python Camera with USB3 Interface – User Manual
GainAuto: Enables automatic gain control. When enabled, the camera constantly adjusts
gain to achieve the luminance target level.
AgcGainMin: Sets the minimum digital gain (1x to 15.9x).
AgcGainMinRaw: Sets the minimum digital gain in RAW units.
AgcGainMax: Sets the maximum digital gain (1x to 15.9x).
AgcGainMaxRaw: Sets the maximum digital gain in RAW units.
ExposureAuto: Enables automatic exposure control. When enabled, the camera
constantly adjusts the exposure to achieve the luminance target.
AecExposureMin: Sets the minimum exposure time value in microseconds
AecExposureMax: Sets the maximum exposure time value in microseconds
AgcAecLuminanceLevel: Sets the desired luminance level to be maintained during AGC or
AEC.
AgcAecLuminanceType: Sets how the luminance target is calculated in AGC or AEC.
Options are Average or Peak.
AgcGainCurrentValue: Displays current digital gain value calculated in AGC mode.
AgcGainCurrentValueRaw: Displays current digital gain value calculated in AGC mode in
RAW units.
AgcMinLimitReached: Returns a value '1' if the minimum digital gain limit was reached
while in AGC mode. Otherwise, the value is '0.'
December 5, 2017
Figure 22: Auto Gain and Auto Exposure.
Page
51 of 78
Rev 1.0