Filter for External Batteries
The DC Filter serves as an EMC barrier against the outside electrical
environment and a mechanical barrier against the outside climatic
environment.
4
Interface
4.1
Signal and Power Interface
The DC Filter has the following external interfaces:
•
•
•
•
•
Voltage and current
Table 2
Rated voltage
Feed-through current
Ericsson AB
SE-164 80 Stockholm
Sweden
implementation.GSMsupport@era.ericsson.se
4 (4)
Two input terminals for 70 – 185 mm
semi-enclosed clamp type.
Strain-relief clamps for cables with diameter 14 – 26 mm.
Output cable negative (-) is a 70 mm
Anderson power plug.
Output cable positive (+) is a 70 mm
Anderson power plug.
A hole for an optional temperature sensor connector is provided.
Limiting values
2
cables. The input terminals are of
2
cable, about 420 mm long, with an
2
cable, about 420 mm long, with an
100 V DC
175 A
Due to continued progress in methodology, design and manufacturing,
the contents of this document are subject to change without notice.
DC Filter for RBS 2106
© Ericsson AB
EN/LZT 720 0302 R1A