Component Identification - Trane TR200 Operating Instructions Manual

Installation
Illustration 3.5: Power Connections
Electrical Installation

Component Identification

Mechanical layout drawings are provided inside the cover of each unit with an option panel. These illustrations
are intended to provide the installer or equipment user with component identification and location for that
specific unit. The below figure represents a typical layout drawing. The following table provides definitions for
drawing reference designators. (Not all reference designators are shown.)
Illustration 3.6: Sample Mechanical Layout Diagram
18
VDF
VDF
1
F16
M1
24V
M3
M2
GD
GD
TR200 Option Panel Operating Instructions