Quality information Congratulations on purchasing this product at Schaller GmbH (Ltd.). The function of your instrument has been examined and calibrated before delivery. First setting into operation Your measuring device should be supplied with a battery by the manufacturer. If this is not the case, open the battery compartment and stick a 9 V block battery or a charged accumulator onto the connecting contacts.
Page 4
Yet it is not possible to develop a measuring device that is ideal under every single condition; even FS_200-HT has a certain limited range to provide optimum results. In order to minimize incorrect applications resulting from that fact...
Page 5
If this seal is broken no warranty claims will be accepted. In case of defect please contact Messtechnik Schaller or your dealer (refer to technical support). Version 1.2 Schaller GmbH...
Page 6
We recommend an ISO-approved examination of the device in regular intervals by applying the kiln drying method. If needed, Messtechnik Schaller GmbH (Ltd.) will also carry out a calibration at your expense. In this case a calibration certificate will be issued and delivered.
5mA, sufficient for about 4000 measuring procedures, when BAT appears on the display, still about 200 measurements are possible display three-digit LC-Display dimensions 100 x 140 x 310 mm weight (without battery) approx. 380 grams Version 1.2 Schaller GmbH Page 7...
Need help?
Do you have a question about the FS_200-HT and is the answer not in the manual?
Questions and answers