DCT5260_OM
10/1/02
5:31 PM
Find Handset
To locate the handset, press find handset on the base
when the base is in the standby mode. The handset
beeps for 60 seconds, and "Paging" appears on the
handset display.
Paging is canceled when pressing the STOP soft key or
any key on the handset or find handset on the base.
Additionally, if you receive an outside/intercom call or
intercom, page is canceled.
Flash and Call Waiting
If you have Call Waiting service and a call waiting tone
sounds while you are on a call, press talk/flash to accept
the waiting call. There is a short pause, then you will hear
the new caller. To return to the original caller, press
talk/flash again.
Page 31
• If the handset
batteries are
completely drained,
the handset will not
beep when paging.
• You must subscribe
through your local
telephone company
to receive Call
Waiting Service.
B A S I C S
[ 31 ]