Uniden DCT5260 Owner's Manual page 34

DCT5260_OM 10/1/02 5:31 PM
• When the memory is
full, you will hear a
beep and "Memory
Full" appears. You
cannot store names
and numbers.
• The pause key counts
as one digit. Pressing
the PAUSE soft key
more than once
increases the length
of pause between
numbers.
• Selecting a speed
dial location where a
number is already
stored, release the
old number's speed
dial setting. New
number will be
stored in the speed
dial location.
[ 34 ] P H O N E B O O K
Page 34
3) Press the STORE soft key, "Store/Edit Name" appears.
4) Enter the name (up to 16 characters) by using the
number keypad. (See the "Steps for entering names and
special characters" on page 35).
If a name is not required, go to step 5. <No Name> will
be stored as the name.
5) Press the OK soft key to store the name,
"Store/Edit No." appears.
6) Press the number keypad to enter the phone number (up
to 20 digits), press the OK soft key to store the number.
7) "Distinctive Ring" appears. Press
the pointer to one of the Distinctive Ring options, then
press the OK soft key.
If you choose not to store a "Distinctive Ring",
simply select the "No Selectn" option.
L
8) "Speed Dial" appears. Press
pointer to select the Speed dial location (10 locations:
SPD1-SPD0).
If you choose not to store the name/number as a Speed
Dial, simply select the "No Selectn" option.
9) Press the OK soft key. You will hear a confirmation
tone and "Done!" appears on the display.
S t o r e / E d i t N a m e
BACK
S t o r e / E d i t N o .
DELETE
L M
or to move
D i s t i n c t i v e R i n g
N o S e l e c t n
F l i c k e r
BACK
M
or to move the
S p e e d D i a l
N o S e l e c t n
S P D 1 : < E m p t y >
BACK
S p e e d D i a l
N o S e l e c t n
S P D 1 : < E m p t y >
BACK
DELETE OK
PAUSE OK
OK
OK
OK