Advertisement
Chapter 7 Meter Setup
Your meter is set up as below at the time of purchase. To change the settings, see the setup mode flowchart.
n Alarm: Off
n Result average display: 7d
n ECO: Off
Setup mode
To go to "SET":
1. Make sure
the meter is
off.
2.
Hold for
5 seconds
Back to "Alarm"
Test strip
Setup end
expiration
Current setting
The meter turns
1. Turn on the
off.
expiration
warning.
NOTE
The meter turns
itself off if left
alone for 3
The date 6 months
minutes (ECO
from the current
mode: 1 minute).
date appears.
Your new settings
will be saved.
OK
To the top of the
expiration
setting.
n Beeper volume: High (3)
n Date: Current local date
n Meal amount: Off
n Bar graph: Upper limit 300 mg/dL, Lower limit 50 mg/dL
n Test strip expiration: Off
Alarm
Current setting
You can make 4
alarm settings.
1. Select an
alarm number.
A1, A2, A3 or A4
to change the settings or
numbers.
2. Turn on the
alarm.
to scroll through the
settings or numbers:
3. Set the hour.
4. Set the minute.
To make another alarm
setting, repeat steps 1 to 4.
5. Go to "End".
To the top of the alarm setting.
ECO
Current setting
1. Turn on the
ECO mode.
The ECO mode
extends battery
life.
To the top of the
ECO mode
setting.
To change
the date:
See steps 1 to
3 in "Date."
to follow the black
Beeper volume
arrows (
).
Current setting
1. Select a
to follow the gray
setting.
arrows (
).
on1: Low
on2: Normal
or
on3: High
oFF: Off
To the top of the
Hold
or
beeper volume
setting.
HYPO
Bar graph
(hypoglycemic)
Current setting
Current setting
1. Turn on the
1. Set the upper
HYPO flag.
limit of the
graph.
20 to 600 mg/dL
2. Set the
threshold value.
2. Set the lower
limit of the
graph.
10 to 80 mg/dL
A HYPO flag
10 to 590 mg/dL
appears when
your test results
are below the
threshold value.
To the top of the
bar graph
setting.
To the top of the
HYPO setting.
- 6 -
n Time: Current local time
n HYPO: Off
Date
Time
Current setting
Current setting
1. Set the year.
1. Select a time
format.
12h or 24h
2. Set the month.
2. Set the hour.
3. Set the day.
3. Set the minute.
4. Select a date
To the top of the
format.
time setting.
d-n: Day-month
n-d: Month-day
To the top of the
date setting.
Result average
Meal amount
display
Current setting
Current setting
1. Turn on the
1. Select a
meal amount
setting.
flag.
7d, 14d, 30d or
90d
To the top of the
meal amount
setting.
To the top of the
result average
display setting.
Advertisement
