Advertisement
Chapter 5 Managing Your Test Results
5.1 Flagging Test Results
Flags help you categorize and identify results.
1. Leave the test strip in the meter after the test result appears on the screen.
2. Select the flag you want.
Delete flag
For inaccurate results. Not part of your result averages. The
delete flag can be attached only after testing.
Before-meal flag
For results obtained before eating
After-meal flag
For results obtained after eating
Clock counter
If the clock counter setting is on, the elapsed
time appears on the right of the after-meal
flag. See chapter 6.2.
Meal amount flag
When the meal amount setting is on, the meal
amount flag appears below the after-meal flag.
50%
Select the amount of food you ate from the 3
levels shown on the left.
80%
Full
After-exercise flag
For results obtained after exercise
3. Slide the test strip disposal lever to eject the test strip. The meter turns itself
off.
5.2 Reviewing Past Results
You can review past results stored in the memory. Your meter stores up to 500
test results. New results beyond the 500th overwrite previously stored results in
the order of oldest first.
1. Make sure the meter is off.
2. Turn on the meter.
The most recent test result
appears on the screen.
The 3-digit number following "M:" is the order in which test results are stored,
with the most recent result first. The screen also shows the date and time
when the test was done.
Hold for
2 seconds
3. View the test result you want.
To go to the next result:
To go back to the previous
result:
To scroll through results:
4. To turn off the meter:
5.3 Viewing Result Averages
You can view result averages for the set interval (7, 14, 30 or 90 days).
1. See steps 1 and 2 in chapter 5.2.
2. View the averages of your
glucose test results.
3. To view the averages with a
flag:
The number of tests
included in the calculation
of the result average.
4. To turn off the meter:
5.4 Deleting All Test Results from the Memory
You can delete all test results from the memory. Remember that results cannot
be retrieved once deleted.
1. See steps 1 and 2 in chapter 5.2.
2. Go to the "AVG (average)"
screen.
3. Go to the "ALL CLEAR"
screen.
4. Select "YES".
5. Delete the test results from the
memory.
The meter then turns itself off.
- 4 -
Hold
Twice
Twice
Hold for
5 seconds
Hold for
2 seconds
Advertisement
