Complete Installation - Jenn-Air JID4436ES Installation Instructions Manual

Electrical Connection Options
If your home has: And you will be
connecting to:
4-wire A fused disconnect
or circuit breaker
box
½"
(1.3 cm)
3-wire A fused disconnect
or circuit breaker
box
½"
(1.3 cm)
4-Wire Cable from Home Power Supply to 4-Wire
Cable from Cooktop
IMPORTANT: Use the 4-wire cable from home power supply
in the U.S. where local codes do not allow grounding through
neutral, new branch circuit installations (1996 NEC), mobile
homes and recreational vehicles, new construction, and
in Canada.
A
B
C
D
A. Cable from home power supply
B. Black wires
C. Green or yellow-green
ground wires
D. 4-wire cable from cooktop
E. Junction box
1. Connect the 2 black wires together using the UL listed
wire connectors.
2. Connect the 2 red wires together using the UL listed
wire connectors.
3. Connect the 2 white wires together using the UL listed
wire connectors.
4. Connect the green (or yellow-green) ground wire from the
cooktop cable to the green (or yellow-green) ground wire
(in the junction box) using the UL listed wire connectors.
5. Install junction box cover.
Go to section:
4-Wire Cable
from Home
Power Supply to
4-Wire Cable from
Cooktop
3-Wire Cable
from Home
Power Supply to
4-Wire Cable from
Cooktop
E
F
G
H
I
F. White wires
G. UL listed wire connector
H. Red wires
I. UL listed or CSA approved
conduit connector
3-Wire Cable from Home Power Supply to 4-Wire
Cable from Cooktop – U.S. Only
IMPORTANT: Use the 3-wire cable from power supply where
local codes permit connecting the frame-ground conductor to
the neutral (white) junction box wire.
A
B
C
D
A. Cable from home power supply
B. Red wires
C. White wire and green (or yellow-
green) wire (from cooktop)
D. 4-wire cable from cooktop
E. Junction box
1. Connect the 2 black wires together using the UL listed
wire connectors.
2. Connect the 2 red wires together using the UL listed
wire connectors.
3. Connect the green or yellow-green and white cooktop cable
wires to the white (neutral) wire in the junction box using the
UL listed wire connectors.
4. Install junction box cover.

Complete Installation

1. Check that all parts are now installed. If there is an extra
part, go back through the steps to see which step was
skipped.
2. Check that you have all your tools.
3. Dispose of/recycle all packaging materials.
4. Use a mild solution of liquid household cleaner and warm
water to clean cooktop before use. Dry thoroughly with a
soft cloth. For more information, see the "Cooktop Care"
section of your Use and Care manual.
5. See the "Cooktop Use" section of your Use and Care
manual.
6. Reconnect power.
NOTE: If the cooktop does not work after turning on the power,
check that a circuit breaker has not tripped or a household fuse
has not blown. See the "Troubleshooting" section of your Use
and Care manual for further information.
If you need Assistance or Service:
Please reference the "Warranty" section of your Use and
Care manual.
E
F
G
H
I
F. White wire
G. UL listed wire connector
H. Black wires
I. UL listed or CSA approved
conduit connector
19