Frequently Asked Questions - General - HTC 950 RX Manual

Frequently asked questions - General:

Question: What range does the remote control have?
Answer: This depends on the surroundings. In normal
conditions with open spaces it will operate for at least 50
metres.
Question: Can you run several machines with a single
radio control unit?
Answer: No, you must have one radio control unit per ma-
chine.
Question: If I mislay my radio control unit, can I get
another HTC 950 RX™ remote control?
Answer: No, the machine and the radio control unit are
paired. A new radio control unit must therefore be ordered
from HTC. The serial number on the machine must be
given when ordering.
Question: Can you work with and remotely control
more than one HTC 950 RX at the same time in the
same area without them interfering with each other?
Answer: Yes, theoretically up to 60 machines but in prac-
tice about 30.
Question: Is it possible to connect and operate other
machines together with the HTC 950 RX™?
Answer: Development is in progress to enable simultane-
ous operation of an HTC 950 RX™ together with other HTC
machines using a single remote control.
Question: What types of floor can I grind using my HTC
950 RX™?
Answer: All known floor types that HTC has tools for. Con-
crete, Marble, Granite, Terazzo etc.
Question: Where can I buy spare parts for my HTC 950
RX™?
Answer: Ring HTC Sweden AB on:
+46 (0)121-294 00 or fax your order to:
+46 (0)121-152 12. You can also check out our product
range at www.htc-sweden.com
34