6.2
Selecting a Departure
Foreword
A Departure Procedure (DP) is loaded at the departure airport in the flight
Getting
plan. Only one departure can be loaded at a time in a flight plan. If a departure
Started
is loaded when another departure is already in the active flight plan, the new
Audio &
departure replaces the previous departure. The route is defined by selection of a
Xpdr Ctrl
departure, the transition waypoint, and a runway.
Com/Nav
NOTE: Vector-only departures are not available in the Procedures database
as the GTN 7XX cannot provide navigational guidance on vectored legs.
FPL
1. Touch the PROC key on the Home page and then touch the
Direct-To
Proc
2. If necessary, touch the Airport key and enter the departure
Charts
Wpt Info
Map
Touch To Select
Traffic
Desired Departure
Terrain
Weather
Nearest
Services/
Music
Utilities
System
Messages
Symbols
Appendix
6-4
Index
190-01007-03-Final.indb 4
Departure key to display the Departure list.
airport. Touch the key for the desired Departure.
Figure 6-2 List for Selecting a Departure
Garmin GTN 725/750 Pilot's Guide
190-01007-03 Rev. J
7/9/2015 2:07:16 PM