Garmin GTN 725 Pilot's Manual page 48

Method 2: Select a Nav/Com frequency using the numeric keypad
Foreword
1. Touch the Standby window. A pull down keypad will appear
Getting
Started
2. Touch the numeric keys to add the desired values and touch
Audio &
Xpdr Ctrl
Com/Nav
3. Touching the XFER key will place the selected frequency directly
FPL
To transfer the standby frequency to the active frequency
Direct-To
1. Touch the Active (top) frequency window.
Proc
Airport Identifier and Type Shown
for the Selected Frequency
Charts
The "+" Sign Indicates More Stations
Associated With This Frequency
Wpt Info
Figure 1-21 Com Radio Frequency Windows (Touch Active to Flip/Flop)
2. Each touch of the Active window will flip/flop the Active and
Map
Traffic
3. The identifier and frequency type will be shown for the selected
Terrain
Remote Frequency Selection Control
Weather
On units configured for remote Com frequency Recall, pressing the remote
recall switch will load the next preset Com frequency into the unit' s Standby
Nearest
frequency window. The remote recall switch can be pressed multiple times to
Services/
scroll the entire preset frequency list through the Standby frequency box (the list
Music
will "wrap" from the bottom of the list back up to the top, skipping any empty
preset positions).
Utilities
The standby frequency isn't activated until a Com FLIP/FLOP switch (either
System
bezel-mounted or remote (COM RMT XFR) is pressed. Remote Frequency Selection
only functions on units configured for a remote Com Frequency recall switch.
Messages
NOTE: Frequencies must be stored in the User Frequency List prior to
utilizing the remote channel select switch.
Symbols
Appendix
1-18
Index
190-01007-03-Final.indb 18
with the current Standby frequency highlighted.
Enter to accept the displayed value and place it into the
Standby window.
into the Active window.
Standby frequencies.
Com and Nav frequencies for the nearest stations that are in
the database when the unit is receiving a valid position input.
Garmin GTN 725/750 Pilot's Guide
Active Com Frequency
(Touch to Flip/Flop)
Standby Com Frequency
190-01007-03 Rev. J
7/9/2015 2:06:51 PM