Rotax 125 MAX evo Installation Instructions And Operators Manual page 88

ROTAX 125 MAX evo, Junior MAX evo, Mini MAX evo, Micro MAX evo
3.3. Fuel
For engine operation a mixture of unleaded gasoline of at least ROZ
and fully synthetic 2-stroke oil, mixed at ratio 1 : 50 (2 % oil) has to be used.
 Attention: Carry out a correct running-in procedure. See section 7.3.
 Attention: Too much oil in the fuel mixture (more than 2 %) could lead to engine trouble (e.g.
coking of the exhaust valve, piston ring sticking).
 Attention: Insufficient amount of oil in the fuel mixture (less than 2 %) could result in engine
trouble (e.g. piston seizure).
 Warning: Do not try any different sorts of fuel. This could lead to engine damage and
damage to the intake system.
 Warning: When mixing fuel and fuelling do not smoke or allow naked flames. Gasoline
is highly flammable and explosive under certain conditions.
 Warning: Never perform mixing and fuelling in closed rooms, handle fuel in well-
ventilated areas only.
 Warning: Before each fuelling, shake fuel container well to ensure adequate mixing of
the gasoline with the oil.
 Warning: Fuel the kart only when engine is not running and the combination switch is at
OFF position.
 Warning: Make sure that fuel will not splash onto hot engine components or equipment.
Risk of fire and explosion!
 Warning: Pay attention to the safety advice of the kart manufacturer!
 Attention: Don't spill fuel. Absorb spilled fuel with appropriate drying agent and ensure
ecological disposal.
 Attention: Ensure that no contamination enters the fuel tank and the carburetor.
 Attention: Unleaded fuel has a limited storage life. Store only the quantity of fuel in a container
which will be needed in the near future.
Page 35/53
95 / 91 (RON+MON) / 2
min.
Edition 07/2016