Fuel Level Gauge; Clock - KYMCO Quannon 150 Owner's Manual

CONTROLS & FEATURES

Fuel level gauge

The fuel level gauge shows the approximate fuel supply avail-
able via a segmented display on the LCD. The normal operat-
ing range of the gauge is between the "E segment" 1 and the
"F segment" 2. When the "E segment" or the fuel pump icon
3 flashes, the fuel level is low and you should refill the fuel
tank as soon as possible.
1 1 1 1 1
1 Segment E - indicates "Empty"
2 Segment F - indicated "Full"
3 Fuel pump icon
20
3 3 3 3 3
2 2 2 2 2
Digital clock
The clock displays the time (in hours and minutes) when the
ignition is ON.
To adjust the clock's time, follow this procedure:
1. Turn the ignition switch ON.
2. Press and hold the ADJ. (Adjust) button for more than two
seconds to select the ODO mode.
NOTE: The digital clock can only be adjusted in the ODO
mode. Do not select the tripmeter or oil service meter modes
if you wish to adjust the clock's time display.
3. Press and hold both the MODE and the ADJ. (Adjust) but-
tons at the same time for more than two seconds. You will
know that the clock is in the adjustment mode when the
hour display begins to flash.