Battery Automatic Calibration Utility - Getac V100 Operation Manual

Battery Automatic Calibration Utility

NOTE: To use the Battery Automatic Calibration Utility, the Battery Calibration driver
supplied with your computer must be installed.
After installing the Battery Pack Automatic Calibration Utility, the
Battery Monitor will call up the Battery Learning program every
month. Before running Battery Monitor, it will check if the battery
temperature is between 10
o
39 C, the following screen appears.
Click Yes to run the Battery Learning program's recalibration function
to fully charge the battery pack, discharge it completely, then fully charge
it again.
Click No if you do not wish to run the Battery Learning program's
recalibration function now.
Click Cancel if you do not wish the Battery Monitor to call up the
Battery Learning program every month to run the Battery Learning
program's recalibration function.
Managing Power
o o
C and 39 C. When it is between 10
o
C and
3-4