Using The Touchscreen (Optional) - Getac V100 Operation Manual

Using the Touchscreen (Optional)

NOTE:
Your computer comes with either the touchscreen function or the Active Digitizer
feature.
Make sure the touchscreen driver has been installed properly.
CAUTION: Do not use a sharp object such as a ballpoint pen or pencil on the
touchscreen. Doing so may damage the touchscreen surface. Use your finger or the
included stylus.
The touchscreen is a touch-sensitive device that allows you to easily use
the computer without a mouse or touchpad to communicate with the
computer by controlling the location of the pointer on the screen and
making selection with the buttons.
Here are some common terms that you should know when using the
touchscreen:
Term
Click/Point
Double-click
Drag and
drop
Operating Your Computer
Tap gently on the touchscreen.
Tap twice on the touchscreen rapidly.
Press lightly on the touchscreen and move your finger
until you reach your destination (drag). Finally, release
your finger (drop) when you finish dragging your
selection to the destination. The object will drop into the
new location.
Action
2-12