Live Recording Mode - Elektron Digitone Quick Manual

1. Press [TRACK 1–4] to select the track to which you want to add note trigs and addi-
tional notes. A green [TRACK] key light indicates the active track.
2. Press [RECORD] to enter GRID RECORDING mode. The [RECORD] key lights up
red to indicate that GRID RECORDING mode is active.
3. Press the [TRIG] key to where you want to add or remove notes + [TRACK NOTE]
. A graphic keyboard appears on the screen where you can see all the notes on
the chosen sequencer step. A highlighted key on the screen keyboard indicates the
notes added to the trig.
4. Press the [TRIG] keys to add notes with the corresponding note value. Press the
[TRIG] key of a previously entered note if you wish to remove that note.
5. Press [YES] to enter the changes and then exit. Press [NO] if you wish to exit with-
out making any changes.
Press [RECORD] to exit GRID RECORDING mode.

7.7 LIVE RECORDING MODE

LIVE RECORDING mode is the second method of adding trigs to the tracks. In this record-
ing mode, all the [TRIG] keys are played in real time to input trigs to the tracks. You can
also turn the DATA ENTRY knobs to enter lock trigs with parameter locks in real time.
1. Press and hold [RECORD], then press [PLAY] to enter LIVE RECORDING mode.
If you quickly press [PLAY] twice while keeping the [RECORD] key pressed, you
activate/deactivate the quantization of LIVE RECORDING. The sequencer starts to
play, and the [RECORD] key starts to flash red.
2. Press the [TRIG] keys and turn the DATA ENTRY knobs to enter trigs in real time.
The [TRIG] key pressed determines the pitch value of the note trig.
3. Press [PLAY] to exit LIVE RECORDING mode while keeping the sequencer playing.
GRID RECORDING mode is activated if you press [RECORD] while LIVE RECORD-
ING mode is active.
4. Press [STOP] to stop both recording and playback of the sequencer.
25