Using Mute Mode - Elektron Digitone Quick Manual

5.3 USING MUTE MODE

You can mute/unmute any of the sequencer tracks in this mode. You can mute/unmute all
tracks simultaneously.
1. Make sure a pattern is playing.
2. Press [FUNC] + [BANK] to enter MUTE mode.
3. Press any of the [TRACK] keys to mute the corresponding track. Press again to
unmute. The color of the [TRACK] keys indicates the mute status. Unlit keys are
muted tracks. Green keys are active tracks.
5.4 TEMPO
To change the BPM setting, press the [TEMPO] key to open the TEMPO menu. Use the
LEVEL/DATA knob to change tempo. Pressing the knob while turning it changes the
tempo four BPM at a time. The [ARROW] keys [UP] or [DOWN] change the tempo in frac-
tional steps. Note that you can set both a tempo and a separate tempo for every pattern.
On the main interface screen, press and hold [ARROW] keys [LEFT] or [RIGHT] to nudge
the tempo 10% up or down temporarily. Release the key to revert back to the original
tempo.
21