Operational Instructions - Stamina InMotion II 45-1002C Owner's Manual

OPERATIONAL INSTRUCTIONS

USING THE FITNESS METER
POWER ON : Walking Belt movement or push the button.
Automatic shut off after 4 minutes of inactivity.
POWER OFF :
MODE / CLEAR BUTTON:
Press and release to select functions.
Press and hold for three seconds to reset all functions to zero.
FUNCTIONS:
SCAN: Automatically scans TIME, SPEED, DISTANCE, and CALORIES in sequence with a change
every four seconds. Press and release the button until " " appears on the display and points
to SCAN.
TIME: Displays the time from one second up to 99:59 minutes.
SPEED: Displays the current speed from zero to 999.9 miles per hour.
DISTANCE: Displays the distance from zero to 99.99 miles.
CALORIES: Displays the calorie consumption from zero to 999.9 Kcal.
The calorie readout is an estimate for an average user. It should be used only as a
comparison between workouts on this unit.
HOW TO INSTALL AND REPLACE BATTERY:
1. Open the Battery Door on the back of the METER(26).
2. The METER(26) operates with two AA batteries, the batteries are not
included. Refer to the illustration to install or replace the batteries.
NOTE:
1. Do not mix a new battery with an old battery.
2. Use the same type of battery. Do not mix an alkaline battery with
another type of battery.
3. Rechargeable batteries are not recommended.
9
MODE / CLEAR
AA Batteries