1. Manuals
  2. Brands
  3. Stamina Manuals
  4. Treadmill
  5. T3000 Treadmill 45-1003
  6. Owner's manual

Stamina T3000 Treadmill 45-1003 Owner's Manual

Stamina products, inc 45-1003 t3000 treadmill owner's manual
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
CAUTION:
Weight on this product should not exceed 250 lbs.
2008, 06
This Product is Produced Exclusively by
2040 N. Alliance, Springfield, MO 65803
Customer Service
1 (800) 375-7520
www.staminaproducts.com
Owner's Manual
Exercise can present a health
risk. Consult a physician
before beginning any exercise
program with this equipment.
If you feel faint or dizzy,
immediately discontinue use
of this equipment. Serious
bodily injury can occur if this
equipment is not assembled
and used correctly. Serious
bodily injury can also occur if
all instructions are not
followed. Keep others and
pets away from equipment
when in use. Always make
sure all bolts and nuts are
tightened prior to each use.
Follow all safety instructions in
this manual.
When calling for parts or
service, please specify the
following number.
STAMINA PRODUCTS
Product May Vary Slightly
2008 Stamina Products, Inc.
WARNING
45-1003
MADE IN CHINA
From Pictured.

Advertisement

Table of Contents
loading

Related Manuals for Stamina T3000 Treadmill 45-1003

Summary of Contents for Stamina T3000 Treadmill 45-1003

  • Page 1 Follow all safety instructions in this manual. When calling for parts or service, please specify the following number. 45-1003 STAMINA PRODUCTS MADE IN CHINA Product May Vary Slightly From Pictured. 2008 Stamina Products, Inc.

  • Page 2: Table Of Contents

    TABLE OF CONTENTS Safety Instructions Before You Begin Equipment Warning & Notice Labels Hardware Identification Chart Assembly Instructions Using The Electronics Meter Treadmill Adjustments SAFETY INSTRUCTIONS WARNING: To reduce the risk of serious injury, read the following Safety Instructions before using the INMOTION Read all warnings posted on the INMOTION Read this Owner's Manual and follow it carefully before using the INMOTION...

  • Page 3: Customer Service

    TELEPHONE CUSTOMER SERVICE CUSTOMER SERVICE Tel: 1 (800) 375-7520 Fax: (417) 889-8064 at the factory with the exception 1 (800) 375-7520 ONLINE CUSTOMER SERVICE parts@staminaproducts.com customerservice@staminaproducts.com www.staminaproducts.com MAIL STAMINA PRODUCTS, INC. ATTN: Customer Service P.O. Box 1071 Springfield, MO. 65801-1071...

  • Page 4: Before You Begin

    BEFORE YOU BEGIN Thank you for choosing the INMOTION Treadmill. We take great pride in producing this quality product and hope it will provide many hours of quality exercise to make you feel better, look better and enjoy life to its fullest. Yes, it's a proven fact that a regular exercise program can improve your physical and mental health.
  • Page 5 EQUIPMENT WARNING & NOTICE LABELS This chart is provided to help identify the warning & notice labels on the INMOTION T3000 Treadmill. Please take a moment to familiarize yourself with all of the warning & notice labels. Label is larger than actual size WARNING LABEL(46)

  • Page 6: Hardware Identification Chart

    HARDWARE IDENTIFICATION CHART This chart is provided to help identify the hardware used in the assembly process. Place the washers, the ends of the bolts, or screws on the circles to check for the correct diameter. Use the small scale to check the length of the bolts and screws.

  • Page 7: Assembly Instructions

    ASSEMBLY INSTRUCTIONS Place all parts from the box in a cleared area and position them on the floor in front of you. Remove all packing materials from your area and place them back into the box. Do not dispose of the packing materials until assembly is completed.
  • Page 8 ASSEMBLY INSTRUCTIONS STEP 2 Place the BASE FRAME(1) between the LEFT and RIGHT UPRIGHTS(2, 3) and secure with HEX BOLTS(M12x1.75x75mm)(35) and WASHERS(M12)(45). DO NOT TIGHTEN COMPLETELY. STEP 3 Slide down the upper parts of the FOAM GRIPS(22), so you can see the screw holes at the back side of the tops of the LEFT and RIGHT UPRIGHTS(2, 3).
  • Page 9 ASSEMBLY INSTRUCTIONS STEP 5 Install two AA batteries into the METER(24), two batteries included. See page 10 for detailed battery installation instructions. Slide the METER(24) onto the plate on the U-SHAPED HANDRAIL(5). Connect the UPPER EXTENSION WIRE(26) to the METER(24). STEP 6 Attach the BUMPER STANDS(20) to the bottom of the BASE FRAME(1).
  • Page 10 USING THE ELECTRONIC METER POWER ON : Walking Belt movement or push the button. POWER OFF : Automatic shut off after 4 minutes of inactivity. MODE / CLEAR BUTTON: Press and release to select functions. Press and hold for three seconds to reset all functions to zero.

  • Page 11: Belt Tension

    TREADMILL ADJUSTMENTS The basic idea behind the manual treadmill is to have the belt running on a treadmill board and between two rollers so that the belt will move without much effort. In order for the belt to run smoothly, there are a few points that need to be noted.

  • Page 12: Maintenance

    Verify that all nuts and bolts are present and properly tightened. Replace missing nuts and bolts. Tighten loose nuts and bolts. Verify that the Warning Label is in place and easy to read. Call Stamina Products immediately (1-800-375-7520) for a replacement Warning Label if the Warning Label is missing or damaged.

  • Page 13: Storage

    STORAGE To store the INMOTION To avoid damage to the electronics meter, remove the batteries before storing the INMOTION Treadmill for one year or more. Follow the following process to fold The INMOTION Remove the PULL PIN(6) to unlock the BASE FRAME ASSEMBLY(1). Fold up the BASE FRAME ASSEMBLY(1).

  • Page 14: Product Parts Drawing

    PRODUCT PARTS DRAWING FRONT Belt Guides BACK...

  • Page 15: Parts List

    PARTS LIST DIAGRAM# PART NAME Base Frame Left Upright Right Upright Upright Support U-Shaped Handrail Pull Pin Bumper Front Roller /w Flywheels Front Shaft Bearing (6000zz) Plastic Spacer Rear Roller Rear Shaft Adjustment Bracket Walking Belt Board Left Side Molding Right Side Molding Round Cap (38mm) Bumper Stand...

  • Page 16: Warranty

    To implement this limited warranty, send a written notice stating your name, date, and place of purchase and a brief description of the defect along with your receipt to Stamina Products, Inc. P.O. Box 1071, Springfield Missouri, USA, 65801-1071, or email us at customerservice@staminaproducts.com, or call us at 1 (800) 375-7520.

  • Page 17: Notes

    NOTES...

  • Page 18: Fax/Mail Ordering Form

    PART # EXAMPLE: CUSTOMER SERVICE CUSTOMER SERVICE Fax: (417) 889-8064 parts@staminaproducts.com customerservice@staminaproducts.com www.staminaproducts.com Detach and Mail or Fax the Form Below Stamina Products, Inc. P.O. Box 1071 Springfield, MO 65801-1071 State: Work Phone #: ( DESCRIPTION Rear Unit Assembly ONLINE MAIL STAMINA PRODUCTS, INC.

This manual is also suitable for:

In motion t3000

Table of Contents