Operational Instructions - Stamina inMotion T9000 Owner's Manual

OPERATIONAL INSTRUCTIONS

USING THE FITNESS METER
POWER ON : Walking Belt movement or press the button.
POWER OFF : Automatically shuts off after four minutes
of inactivity.
MODE BUTTON:
Press to select the function value displays of SCAN, TIME,
SPEED, DISTANCE, and CALORIES.
Press and hold for three seconds to reset all functions to
zero.
FUNCTIONS:
SCAN:
Automatically scans each function of TIME, SPEED, DISTANCE, and CALORIES in
sequence with change every six seconds. Press and release the button until "SCAN"
appears on the display.
TIME:
Displays the time from one second up to 99:59 minutes.
SPEED:
Displays the current speed from zero to 99.9 miles per hour.
DISTANCE:
Displays the distance from zero to 999.9 miles.
CALORIES:
Displays the calorie burned from zero to 999.9 Kcal.
The calorie readout is an estimate for an average user. It should be used only as a
comparison between workouts on this unit.
NOTE:
The meter will shut off automatically after four minutes of inactivity. All function values
will be kept. You can continue to workout with these function values, or press the
button and hold it down for three seconds to reset all functions to zero.
HOW TO INSTALL AND REPLACE BATTERIES:
1. Open the Battery Door on the back of the meter.
2. The meter operates with two AAA batteries (1.5V each), the
batteries are not included. Refer to the illustration to install or
replace the batteries.
NOTE: 1. Do not mix a new battery with an old battery.
2. Use the same type of battery. Do not mix an alkaline
battery with another type of battery.
3. Rechargeable batteries are not recommended.
4. Ultimate disposal of battery should be handled
according to all state and federal laws and regulations.
5. Do not dispose of batteries in fire.
11
AAA Batteries