Stamina InMotion II 45-1002C Owner's Manual page 12

STORAGE
1. To store the InMotion® II Treadmill, simply keep it in a clean dry place.
2. To avoid damage to the electronics, remove the batteries before storing the InMotion® II Treadmill for
one year or more.
3. To fold the InMotion® II Treadmill for easy storage, follow this process. Refer to the illustrations below.
a. Remove the PULL PIN(9) to unlock the BASE FRAME ASSEMBLY(1).
b. Fold up the BASE FRAME ASSEMBLY(1). Pull out the BALL KNOB(8) on the spring pin and release
to lock the BASE FRAME ASSEMBLY(1) in upright position.
CAUTION: Make sure the Base Frame Assembly is locked securely in folded position by the spring pin.
c. Store the PULL PIN(9) by inserting the PULL PIN(9) back into the hole in the RIGHT UPRIGHT(3).
4. Move the InMotion® II Treadmill with the moving wheels on the UPRIGHT SUPPORT(4). Grasp the
U-SHAPED HANDRAIL(5) to move the InMotion® II Treadmill.
UNFOLD THE InMotion® II Treadmill
a. Remove the PULL PIN(9) from the RIGHT UPRIGHT FRAME(3).
b. Pull out the BALL KNOB(8) on the spring pin and unfold the BASE FRAME ASSEMBLY(1).
c. Lock the BASE FRAME ASSEMBLY(1) in position by inserting the PULL PIN(9) through the RIGHT
UPRIGHT FRAME(3) and BASE FRAME(1).
12