Measuring Resistance - Tektronix DMM150 Instructions Manual

Measuring Resistance

WARNING. To prevent possible personal injury or
damage to the multimeter, make sure the device
being tested is off and no source of voltage is
present.
1. Connect the black test lead to the COM terminal and
the red test lead to the VW terminal.
2. Move the slide switch to the
default function is W.
3. Connect the test leads across the resistance.
Checking Continuity
1. Connect the black test lead to the COM terminal and
the red test lead to the VW terminal.
2. Move the slide switch to the
3. Press the blue button until the
4. Connect the test leads across the circuit. The
multimeter will sound a continuous beep if the
resistance is less than 20 W.
6
position. The
position.
symbol appears.