G3 Analog Line - Ricoh aficio 350 Operating Instructions Manual

FACSIMILE USER TOOLS

G3 Analog Line

This function must be set up before
you connect the machine to a G3 ana-
log line.
You can register the following items
with a G3 analog Line:
• PSTN Line Type (Dial Pulse/Tone)
• CSI (up to 20 digits)
• Own Analog Number (up to 16
digits)
Note
A CSI (Called Station Identifica-
tion) is notified to a receiver or
sender when you send or receive a
fax. When the CSI is received, it is
shown on the display or printed in
a report by the receiver's or send-
er's machine. The CSI works even
if the receiver or sender uses a dif-
ferent make machine.
7
The CSI can contain numerals, a
plus sign (+), and spaces. You usu-
ally should register your country
code, area code (minus the leading
zero) and your fax number in that
order.
Specify your own analog number
(the telephone number to which
your machine is connected) so that
the transfer station can return the
Transfer Result report to you. You
can program numbers and a pause
in your own number. Be sure to en-
ter a pause after the area code.
A
Make sure that the machine is in
Facsimile mode and the standby
display is shown.
198
Note
If the standby display is not
shown, press the { { { { Fax} } } } key.
B
Press the { { { { User Tools/Counter} } } } key.
Sort
1-Sided 2-Sided
2
1
1
Book 2-Sided
Staple
2
Stack
2-Sided 2-Sided
2
2
Enhanced Auto Reduce/
C
Enter the number of the "Fax".
The Facsimile User Tool main
menu appears.
Reference
For how to use the System User
Tools, refer to the System Set-
tings manual.
D
Enter the function number for
"Key Op. Settings" using the
number keys and press the { { { { #} } } }
(Enter) key within 3 seconds.
Note
If "Key Op. Settings" is not
shown, press [↑ ↑ ↑ ↑ Prev.] or [↓ ↓ ↓ ↓ Next].
E
Enter the function number for
"G3 Analog Line" using the num-
ber keys.
User Tools / Counter
ND2L01E0