Ethernet Configuration - Moxa Technologies NPort W2250 Plus User Manual

NPort W2250/2150 Plus User's Manual

Ethernet Configuration

You must assign a valid IP address to NPort W2250/2150 before it will work in your network
environment. Your network system administrator should provide you with an IP address and
related settings for your network. The IP address must be unique within the network (otherwise,
NPort W2250/2150 will not have a valid connection to the network). First time users should refer
to Chapter 3, "Initial IP Address Configuration," for more information.
Choose from four possible "IP configuration" modes—Static, DHCP, DHCP/BOOTP, and
BOOTP—located under the web console screen's IP configuration drop-down box.
IP configuration
Method
Static
DHCP
DHCP/BOOTP
BOOTP
IP address
Setting
E.g., 192.168.1.1
(IP addresses of the form x.x.x.0
and x.x.x.255 are invalid.
An IP address is a number assigned to a network device (such as a computer) as a permanent
address on the network. Computers use the IP address to identify and talk to each other over the
network. Choose a proper IP address that is unique and valid in your network environment.
Function Definition
User defined IP address, Netmask, Gateway.
DHCP Server assigned IP address, Netmask, Gateway, DNS,
and Time Server.
DHCP Server assigned IP address, Netmask, Gateway, DNS,
and Time Server, or BOOTP Server assigned IP address (if the
DHCP Server does not respond).
BOOTP Server assigned IP address.
Factory Default
192.168.126.254
5-6
Web Console Configuration
Necessity
Required