Print - Bosch KT700VCI User Manual

9.5 OtherFunctionsRelatedtoDiag-
nostic
9.5.1

Print

The "Print" function provides three options, i.e. "Print
Current Screen", "Print Detection Record" and "Print
Diagnosis Report".
Print Modes:
R
Print: if the computer has been connected with a
printer, direct print is available; or else, you can only
preview the information to be printed.
R
Print to File: see 9.5.1.4.
9.5.1.1 Print�urrentScreen
It is used to print the content displayed in the current
screen.
Operation Steps:
1. Select "Print" --- "Print Current Screen";
2. Just select a print mode (either "Print" or "Print to
File") to start printing.
i
When you select "Print Current Screen", it is un-
necessary to enter any information, and all informa-
tion displayed in the current screen will be directly
printed.
9.5.1.2 PrintDetectionRecord
It is used to print the current detection information.
Operation Steps:
1. Select "Print" --- "Print Detection Record"; only after
detection functions (such as "Read Fault Codes",
"Read Data Streams" and "Read Version Informati-
on") have been enabled can this button be available;
or else, this button will be gray, which means una-
vailable;
2. Fill in the corresponding blanks with the information
relevant to detection record; any blank marked with
"*"must be filled in, otherwise it is impossible to
print the detection record;
3. Just select a print mode (either "Print" or "Print to
File") to start printing.
Bosch Automotive Diagnostics Equipment (Shenzhen) Limited
�ehicleDiagnostic|���|25
9.5.1.� PrintDiagnosticReport
It is used to print the diagnostic report.
Operation Steps:
1. Select "Print" --- "Print Diagnosis"; only after any of
the functions (i.e. "Fault Codes", "Data Streams" and
"Version Information") has been enabled can this
button be available; or else, this button will be gray,
which means unavailable;
2. Select the diagnosis report(s) to be printed; it is
available to simultaneously print the diagnosis re-
ports on Version Information, Fault Codes and Data
Streams, provided that such three functions have
been enabled; if merely the "Read Version Informati-
on" function has been enabled, then the Fault Codes
and the Data Streams will be gray and cannot be
printed;
3. Fill in the corresponding blanks with the information
relevant to diagnosis report; any blank marked with
"*"must be filled in, otherwise it is impossible to
print the diagnosis report;
4. Just select a print mode (either "Print" or "Print to
File") to start printing.
9.5.1.4 PrinttoFile
5. It is used to print the desired content into an image
file in the "JPG" format.
Operation Steps:
1. Select "Print to File" to get a pop-up dialogue box
for saving;
2. Select the save path for the file;
3. Enter the file name;
4. Finally, click the "Save" button.
���|25 |25 en