Vci Information - Bosch KT700VCI User Manual

en 18|���|���systemsettings
8.� ���
The VCI include VCI communication settings, VCI infor-
mation, and VCI selfcheck.
8.�.1 ����ommunicationSettings
The VCI communication port settings include the USB
settings, LAN settings, and WLAN settings.
8.�.1.1 USBSettings
When the VCI is normally connected with the computer,
the system will automatically match with the available
serial port list.
Operation Steps:
1. Select a serial port name, and click the "Automatic
Connection Test" button to test the available serial
port;
2. After the test is completed, the system will automati-
cally prompt whether to save the settings;
3. Click the "Yes" button to save the successful seri-
al port and the result will be displayed in the test
result display box.
8.�.1.2 LANSettings
The LAN settings include the P2P mode and the route
mode.
Operation Steps for P2P Mode:
1. Select the P2P mode;
2. Enter the relevant information;
3. Click the "Automatic Connection Test" button and
wait for the test completion;
4. After the test, the test result will be displayed in the
result display box.
Operation Steps for Route Mode:
1. Select the route mode;
2. Enter the relevant information;
3. Click the "Automatic Connection Test" button and
wait for the test completion;
4. After the test, the test result will be displayed in the
result display box.
8.�.1.� WLANSettings
The wireless network settings include the P2P mode
and the route mode.
Please ensure WLAN normally connected of computer.
Operation Steps for P2P mode:
1. Select the P2P mode;
2. Click the "Scan Network" button to search the availa-
ble wireless network;
3. Select the available wireless network, click the "OK"
button, and the interface will display the information
concerning all networks connected with the VCI;
4. Click the "Automatic Connection Test" button and
wait for the test completion;
5. After the test, the test result will be displayed in the
result display box.
Operation Steps for Route Mode:
1. Select the route mode;
2. Click the "Scan Network" button to search the availa-
ble wireless network;
3. Select the available wireless network, click the "OK"
button, and the interface will display the information
concerning all networks connected with the VCI;
4. Click the "Automatic Connection Test" button and
wait for the test completion;
5. After the test, the test result will be displayed in the
result display box.
8.�.2 ����nformation
The VCI information include the serial number and firm-
ware (VCI) software version; after the VCI is normally
connected with the computer, the system will start the
automatic detection.
8.�.� ���Selfcheck
This function is used to detect whether the VCI is nor-
mal.
Operation Steps:
1. Ensure normally connection between the VCI and the
computer;
2. Click the "Start Selfcheck" button and wait for the
selfcheck completion and detection result display.
i
When VCI selfcheck, ensure disconnection between
VCI and diagnostic cable.
Bosch Automotive Diagnostics Equipment (Shenzhen) Limited