Ntroductionto���Host - Bosch KT700VCI User Manual

en 14|���|�ntroductionto���host
5. Introduction to VCI host
5.1 Hostidentifications
Identifi- Description
cation
The power indicator lamp, lighting in green to indi-
cate the normal power supply;
The computer communication indicator lamp, ligh-
ting in green to indicate the wired connection or in
yellow to indicate the wireless connection;
The malfunction indicator lamp, lighting in red to in-
dicate the VCI malfunction;
The ECU communication indicator lamp, lighting in
green to indicate the CAN communication mode or
in yellow to indicate other communication modes;
The travel recorder button identification, used for
your convenient and rapid operation.
5.2 Diagnosisport
1
Fig. 1: Diagnosis Port
1. Data record interface
2. Diagnosis interface
3. Power interface
5.� �onnectionPort
USB
1
Fig. 2: Connection port
1. USB communication interface
2. Network communication interface
DIAG
VCI001
2 3
VCI002
2
6. Equipment connection
According to different functions, the connection modes
are: including diagnostic connection, selfcheck connec-
tion and firmware upgrade connection.
6.1 Diagnosticconnection
Before using the equipment, please ensure the normal
connection among the VCI, computer, and on-board
ECU. The main connection modes are: including the
USB port connection, network port connection and
wireless connection. If all connected, the USB port con-
nection is preferential.
7
8
9
5
Fig. 3: Diagnostic connection
1. Interface on car
2. Connector
3. Diagnostic extension cable
4. Power extension lead
5. Record cable
6. VCI host
7. Computer
8. LAN cable
9. USB cable
10. Alligator clip
11. Cigarette igniter connector
Bosch Automotive Diagnostics Equipment (Shenzhen) Limited
1
2
10
6
3
4
11