Software Upgrade - Bosch KT700VCI User Manual

8.1.5 ProductActivation
If the product is not activated, you can only view the
test demonstration rather than carrying out the diagno-
sis with VCI.
Operation Steps:
1. Check whether your VCI host is normally connected
with the computer; If ok, the VCI software will auto-
matically detect the product serial number;
2. Please read the display information, then click "Acti-
vation" button, the software will automatically detect
the network; If not ok, display "Network connection
overtime";
3. If network is worked to proceed to the individual in-
formation filling interface; please enter your informa-
tion following the interface prompts; If information
incorrect, you must to re-enter;
4. If all information is accurate, click the "Next" button,
the interface will display "Successful product activa-
tion, software must to restart";
5. Please restart software, you can using it.
i
User name is combined by letters and numbers, the
length is 3-16 characters; the password length is
6-16 characters;
i
The user name is used for upgrade log-in, which
can't be repeated, and real-name registration is
recommended; the E-mail is used for the password
retrieve, and please fill your frequently-used E-mail;
upon submitting your individual information, please
remember your user name and password.
8.2 Softwareupgrade
Software upgrade includes software upgrade and VCI
firmware upgrade.
This function is available only after the product activati-
on. If not, display "Not activation".
i
Before upgrade, please ensure the normal connec-
tion between the VCI and computer;
i
Ensure the integrity of the upgrade process by not
forcing to terminate the program.
Bosch Automotive Diagnostics Equipment (Shenzhen) Limited
���systemsettings|���|17
8.2.1 SoftwareUpgrade
Software upgrade includes application software up-
grade and diagnostic database upgrade.
Operation Steps:
1. The software will automatically detect the version of
application software and diagnostic database;
2. If you didn't change the user name and password,
click the "New Version Detection" button to detect
the latest version; If you changed, you must to enter
user name and password at first;
3. If there have new version, the interface will display
"Download" button;
4. Click "Download" button, waiting for finished; You
can monitor download progress;
5. After successfully download, click "Install" button to
insatll upgrade package;
6. After restart software, you can using the latest soft-
ware.
i
When you log-in, user name and password is entered
3 times, if more, you must to wait 15 minutes.
8.2.2 ���FirmwareUpgrade
If VCI firmware have new version, VCI will automatically
upgrade when you start VCI software.
Operation Steps for manual Upgrade:
1. Click "Upgrade" button, then operate according to
interface display;
2. After successfully upgrade, display "Successfully
upgrade".
i
Upon the VCI firmware upgrade, the VCI can be
connected with the computer only through the USB
port;
i
If you didn't operate according to display informati-
on.
���|17 |17 en