Nitialstart-Up - Bosch KT700VCI User Manual

en 16|���|�nitialStart-up
7. Initial Start-up
Upon the initial start-up, the normal use of VCI can be
achieved after setting the communication port.
If your VCI is connected with the computer through the
USB communication line, please make settings fol-
lowing descriptions in section <8.3.1.1>;
If your VCI is connected with the computer through the
network cable, please make settings following descrip-
tions in section <8.3.1.2>;
If your VCI is connected with the computer through the
wireless mode, please make settings following descrip-
tions in section <8.3.1.3>.
8. VCI system settings
8.1 SystemSettings
The system settings include the language settings, sys-
tem information, user information, proxy settings, pro-
duct activation.
8.1.1 LanguageSettings
The VCI provides the multi-language system for user to
switch languages.
Operation Steps:
1. Proceed to the language settings module and select
the target language from the "Language Type Selec-
tion" box;
2. Click the "OK" button and the interface will prompt
"Effective after System Restart".'
3. The language settings will be effective after the
system restart.
8.1.2 Systeminformation
The system information includes the product serial
number, instrument type, machine type, software versi-
on, and activation status.
8.1.� Userinformation
The user information includes the contact information,
telephone number, maintenance station name, mainte-
nance station code, maintenance station address, and
remarks.
If such information is consistent with that upon prin-
ting, you can directly enter them and click the "OK"
button for saving. It is unnecessary to enter such infor-
mation upon printing.
Operation Steps:
1. Enter your information in the "*" input box marked;
2. Click "OK" button and save your informations; you
can click "Cancel" button and don't save information.
8.1.4 ProxySettings
This function is intended to judge whether the proxy
server is required for the computer networking; if not
required, select "Don't Use the Proxy Server".
Setting method for using the proxy server:
1. Select "Use the Proxy Server";
2. Enter the address and port information;
3. You can set the user name and password for settings
protection;
4. Click the "OK" button.
Bosch Automotive Diagnostics Equipment (Shenzhen) Limited