Special Operations - Siemens Albatros2 Technical Manual

11 Appendix

Special operations

11.2
Procedure
94
Siemens
Building Technologies
Special operations
Available special operations depend on the controller. The following depicts how to
proceed with selected special operations. The list is not all-encompassing.
The technical functionality of special functions is described on the user guide for
your controller.
NOTICE
Damage to property caused by the improper use of special functions.
Special functions can trigger unwanted operating states.
● Read the corresponding information in the user's guide for your controller.
● Contact a heating engineer if you are unsure about the consequences of a
special function.
Eco mode
Notes on Eco mode are available in user's guide for your controller.
w Navigation to special operation menu is described in Section "Operate special
functions [➙ 66]".
1. Select "Eco mode" = "On".
The function is activated.
2. Conclude the function with "Eco mode" = "Off".
Depending on the controller, the energy savings function Eco mode is displayed
without the maintenance/special operating symbol is displayed.
Graphical User Interface UI400 CE1U2348en
2014-06-03