Plant Operation, Quick Access - Siemens Albatros2 Technical Manual

5 Plant operation, quick access

Basic navigation
Siemens
Building Technologies
"Plant operation, quick access" is done in the end user view.
You can conduct the operating steps described below on a room unit QAA74 or
operator unit AVS74. Differences between the information provided on the operator
unit and room unit are limited to the following areas:
The room unit's start page ( ) presents the values relevant to the room.
l
The operator unit's start page ( ) focuses on producer information.
l
In the event of multiple room units, individual room units can be assigned to
l
individual living zones. Operator units are normally assigned to all living zones.
Additional information on assignment of room/operator units to living zones is
available in Section "Settings in detail [➙ 88]".
Basic navigation on the navigation bar and work area for the following menus is
described in Section "Operation [➙ 36]", section "Navigate and set with the control
knob".
Graphical User Interface UI400
Plant operation, quick access
USB connection, unlock button
5
41
CE1U2348en
2014-06-03