Modify nominal setpoint
Set the time program
Siemens
Building Technologies
CAUTION
Danger of burns.
Excessively hot water can result in burns.
●
Set the nominal set points so that scalding at the taps is not possible.
To set the nominal setpoint for hot water, proceed in the manner as described for
the temperature page ("Set comfort setpoint").
Settings:
The phases are defined in the time switch program during which hot water is
l
provided.
Hot water is heated to the nominal setpoint during these phases.
l
To set the time program for hot water, proceed in the manner as described for the
temperature page.
Graphical User Interface UI400
Plant operation, quick access
Operate hot water
5
55
CE1U2348en
2014-06-03