Step 3: Installing Ink Cartridges - Primera II User Manual

TOC

Step 3: Installing Ink Cartridges

• Press the Ink Cartridge Button
Cartridge Carrier to the load position and open the ink
cartridge covers
• Remove each ink cartridge from its packaging
• Slowly remove the tape covering
the cartridge's print head, being
careful to avoid damaging the
barcode label on the underside of
the cartridge.
DO NOT TOUCH THE COPPER AREA!
• Insert the ink cartridges into the carrier, copper end first
and snap the cartridge cover in place. Insert the color
in the left holder, monochrome black in the right
cartridge holder.
2
1
1. Push in
2. Lift Up
• Close the Publisher's front cover.
INDEX
to move the Ink
Software and Hardware Set-Up 11