TOC
Refer to the following steps when loading discs in to the
Publisher:
•
Open the front cover of the Publisher
•
The Publisher will automatically position the cartridge
carrier and Robotic Disc Transporter to the center position
allowing for easy access to the bins.
•
Load the Input Bin (the bin located on the right-hand side
of the Publisher) with 25 blank discs and place the bins on
the mounting pegs.
Step 3: Installing Ink Cartridges
• Press the Ink Cartridge Button
Cartridge Carrier to the load position and open the ink
cartridge covers
• Remove each ink cartridge from its packaging
10 Hardware and Software Set-Up
INDEX
to move the Ink