Table of Contents
Advertisement
TOC
e.
YOU MUST CLICK Page Setup and set Format For to
Disc Publisher II!
Also set the option to select a
in Section D: Printer Settings on page 38 of this
manual.
f.
Print Settings will launch the
when clicked. These settings are described in detail in
section 3-D of this manual.
g. Set Print disc before recording/ Record disc before
printing. Record disc before printing is
recommended for most jobs to avoid printing on discs
that do not burn properly. Print Before Recording is
used for jobs involving Hockey Rink or Business Card
shaped CD-Rs where it is important to print before
recording for proper card alignment.
h. If using
"Reject" on Bad Discs in Kiosk Mode. When enabled,
this will cause a disc that has failed to verify to be
printed with the word REJECT prior to being ejected
from the publisher to make it easier for bad discs to be
identified in the output stack when using the Kiosk
Mode. If this option is not enabled, bad discs will be
ejected with no printing at all.
i.
Select the Number of discs requested for this job.
26 Creating Discs
Kiosk
Mode, choose whether or not to Print
INDEX
paper size
as described
Printer Driver
settings
Advertisement
Table of Contents
