Primera II User Manual page 19

Automated optical disc duplication & printing system
Table of Contents

Advertisement

TOC
Alignment Calibration Print
Clicking this button will print a test disc that will provide a
scale by which to calibrate the Color Ink Cartridge to the
Monochrome Ink Cartridge. This is crucial when selecting the
Black and Color Ink Cartridge setting in the
described in Section D: Printer Settings on page 38 of this
manual. Make certain you have discs and ink installed in your
Bravo prior to pressing this button. Once pressed, the Bravo
will load a disc and print the following pattern:
Follow the on-screen instructions and enter the numbers as
indicated. For instance, in the example shown, you would
choose a value of 10 for the A setting and 6 for the B setting.
It is highly recommended that you perform this calibration
whenever you change cartridges if using the Black and Color
ink cartridge setting in the printer driver.
Image Alignment
The Image Alignment button will allow you to nudge the
image up, down, left, or right on your disc. To center the
image, click the Image Alignment button. You will be
prompted with a choice to print a test print or simply enter
values to nudge the image alignment on the disc.
0
4
8
12
1
5
9
13
A
2
6
10
14
3
7
11
15
0 2
4 6
8 10
12 14
B
Software and Hardware Set-Up 15
INDEX
Printer Driver
as

Advertisement

Table of Contents
loading

This manual is also suitable for:

Bravo ii

Table of Contents