Table of Contents
Advertisement
TOC
Rear Panel
This illustration shows the input ports found on the rear panel
of the Publisher:
The USB 2.0 Interface is connected to an open USB 2.0 port on
your computer with a standard USB cable, included with your
Publisher.
The
Power Input
switching power supply.
D.
SYSTEM REQUIREMENTS
Before getting started, it is important for you to verify that your
computer meets the recommended system requirements. Here's
what you need in order to successfully burn and print with the
Discribe
•
G4 PowerPC 700MHz or higher running OS X version 10.2
or higher
•
256MB RAM
•
Free hard drive space of at least 2 GB (up to 6 GB for DVD)
•
Available USB 2.0 Port
•
Do not connect the Bravo to any USB hubs or the USB port
on your keyboard. It should be connected directly to an
on-board USB 2.0 port.
If your computer does not have at least these minimum system
requirements, system performance may not be acceptable.
4 Getting Started
USB 2.0 Port
Port connects to the included 100V~240V 12V
software:
INDEX
Power Input Port
Advertisement
Table of Contents
