Table of Contents
Advertisement
Chapter 4
Setting Up the Server
4.1
Creating a WWN Instance Management Table for the Server
Table 4.1 WWN Instance Management Table for the Server
Physical slot name
1
Check the instance names.
"fjpfca + instance number" is the format used to represent Fibre Channel card instance names.
The instance number that corresponds to the physical path in which the Fibre Channel card is installed
is stored in the "/etc/path_to_inst" file at the Fibre Channel card driver installation. Extract the necessary
lines using the "grep" command.
# grep "fjpfca" /etc/path_to_inst
Example:
"/pci@6,4000/fibre-channel@2" 1 "fjpfca"
"/pci@4,2000/fibre-channel@1" 0 "fjpfca"
(1) indicates the physical path name and (2) indicates the instance number.
"fjpfca1" is the instance name of the "/pci@6,4000/fibre-channel@2" path Fibre Channel card.
"fjpfca0" is the instance name of the "/pci@4,2000/fibre-channel@1" path Fibre Channel card.
2
Enter the results in "Instance name" and "Physical path name" columns of the "WWN instance manage-
ment table for the server".
Physical slot name
3
Check the WWN of each Fibre Channel card.
Execute the following command to check the WWN that corresponds to the Fibre Channel card instance
name.
# /usr/sbin/FJSVpfca/fc_info -a
"adapter=fjpfca#x" ("x" is instance number) is the format used to represent Fibre Channel card instant
names. The WWN corresponding to the instance name is displayed after "wwn=".
FUJITSU Storage ETERNUS DX, ETERNUS AF Configuration Guide -Server Connection- (Fibre Channel) for Oracle Solaris
WWN
(1)
(2)
Instance name
Physical path name
WWN
fjpfca0
/pci@4,2000/fibre-channel@1
fjpfca1
/pci@6,4000/fibre-channel@2
10
Copyright 2017 FUJITSU LIMITED
Instance name
Physical path name
P3AM-3712-15ENZ0
Advertisement
Table of Contents
