Setup And Connections - SONIQ QPi600B Instruction Manual

Setup and Connections

CONNECTING TO A TV
The unit can be connected to your TV in several different ways, depending on the design of your TV.
Note: Use only one of the below listed connection method for connecting to your TV.
A. RCA AUDIO/VIDEO JACKS
1. Use the Audio/Video cable (supplied). Connect the
VIDEO OUT and left/right AUDIO OUT jacks on the
unit to the VIDEO IN and left/right AUDIO IN jacks
on your TV.
AV cable (included)
DRC300i
B. COMPONENT VIDEO OUT (DVD)
Some TVs or monitors are equipped with component
video inputs.
Use an audio cable (not supplied), connect the left/
right AUDIO OUT jacks on your unit to the left/right
AUDIO IN jacks on your TV.
Using a component video cable (not supplied),
connect the y VIDEO OUT jack (green plug) on your
unit to the y VIDEO IN jack on your TV, the P
OUT jack (blue plug) on your unit to the P
IN jack on your TV and the P
plug) on your unit to the P
to view the highest quality picture playback.
TV
VIDEO
B
VIDEO
B
VIDEO OUT jack (red
R
VIDEO IN jack on your TV
R
2. Use the S-video cable (not supplied). If the TV
has a S Video input, connect the unit with an S
video cable. When using an S-Video cable, do not
connect the yellow video cable and component
video cables (y/P
S-video
cable
DRC300i
AUDIO IN
Audio cable
(red and white)
DRC300i
- 8 -
/P ).
B R
TV
Audio cable
(red and white)
TV
VIDEO IN
Component
video cable
(green/blue/red)